Infitac Fast Mini FMP13 Review: How a Tiny Thermal Sight Can Change Your Shooting

Thermal optics usually mean a lot of weight and a large form factor. The Infitac Fast Mini FMP13 heads the other way. It delivers a 256×192 thermal core, a 13 mm F1.0 lens, a 1.4-inch 360×300 display, and a 60 Hz overlay refresh in a package that weighs about four ounces. The housing carries an IP67 rating and a 1200 g recoil claim, with power coming from a single CR2 battery rated for about 5 hours at room temperature. The product page confirms these points and also lists a three-year warranty.

What Is the Infitac Fast Mini FMP13? Redefining Portable Thermal Imaging

The Infitac Fast Mini FMP13 is a mini thermal sight that mounts on an optics-ready pistol through a standard RMR footprint. It can also live on a rifle as a secondary thermal view or ride along as a simple handheld scanner. The company sells adapter plates for RMSc, DPP, and Glock MOS, and rifle mounts for Picatinny, a 30 millimeter ring, an offset position at forty-five degrees, and the Aimpoint Acro interface. This ecosystem gives owners a straightforward path to move one optic across platforms.

Core Features and Technical Highlights of the Infitac FMP13

If you are skimming for the essentials, the notes below gather the specs that actually shape day-to-day use: imaging and field of view, refresh and controls, power and runtime, plus durability and mounting. Use this quick check to confirm fit, session length, and setup options before you decide.

• Imaging and optics: 256×192 sensor, 12 micron pitch, 13 mm F1.0 lens, field of view 13.5° x 10.1°, display 1.4 inch 360×300 with electronic zoom at one time and two times.
• Refresh and controls: 60 Hz overlay refresh, touchscreen plus physical buttons, multi reticle choices, and auto brightness.
• Power: one CR2 battery with up to five hours at about twenty-two degrees Celsius, external power through USB Type C at five volts is supported and prioritized over the internal battery; rechargeable CR2 batteries are compatible.
• Durability and weight: IP67 sealing, 1200 g recoil rating, operating range from minus four to plus one hundred twenty-two degrees Fahrenheit, and weight at or under four ounces.
• Mounting and in box: standard RMR plate included, optional RMSc and DPP and Glock MOS plates, rifle mounts for Picatinny and a thirty millimeter ring and a forty five degree offset and an Acro plate; the box includes the RMR adapter, two heated zero targets, two CR2 cells, a USB C cable, screws and tool, manual, and warranty card.

Thermal Pistol Sights Fast Mini FMP13

Price : $699.00

The World’s First Multi-Function Thermal Pistol/Rifle Sight. The INFITAC Fast...

Learn more

Add to Cart

Texas Plinking Review: Real World Performance Across Different Scenarios

Independent testing helps readers move past a spec sheet. Texas Plinking posted a full video that shows the Infitac Fast Mini FMP13 on pistols, as a canted thermal on a rifle, and used as a small scanner. His field use mirrors the intended roles and highlights how little balance penalty you feel on a slide and how a canted position next to a day optic creates a quick heat check. A recent article from Professional Shit summarizes the same video and reinforces that the four-ounce footprint is the headline advantage.

Performance Breakdown: Image Quality, Zeroing, and User Experience

Image quality and distance. The 256×192 core, the bright F1.0 objective, and the 1.4 inch-display give enough contrast for detection at short and moderate ranges. Palettes include White Hot, Black Hot, Red Hot, and Rainbow, with reticles that cover a 6 MOA dot and circle dot options. The overlay refresh is rated at sixty hertz, which supports smooth panning during a scan.

Zeroing and setup. The box includes two heated targets for initial alignment and the RMR plate with hardware. After the first range session, verify screw tension and confirm zero again. If you intend to run the Infitac Fast Mini FMP13 as a canted optic on a rifle, pick a stable mount and check interface screws after a few magazines. INFITAC’s accessory pages outline several mount choices that fit common setups.

Power and uptime. Expect roughly five hours per CR2 at room temperature, with ambient light and temperature affecting the result. External power through USB-C takes priority over the internal cell, and the port supplies power only. A small battery pack with a short cable keeps the sight running during long walks or a long sit.

Handling and resilience. The body carries IP67 and a 1200 g recoil rating. The warranty panel lists a three-year term for the Fast Mini. Those details are worth noting for owners who plan to move the optic between pistol and carbine or use it in rough weather.

Why the Infitac Fast Mini FMP13 Is Worth Choosing?

A few qualities make the Infitac Fast Mini FMP13 stand out. Size and weight keep it in the realm of a red dot while still giving a true thermal view. The control scheme blends a touchscreen with buttons, so it works bare-handed or with gloves. The mount ecosystem is broad enough to support pistol, carbine, and scanner roles with one optic. Power is simple with a single CR2 and the option to run from a battery pack when you want extended sessions. Back-end support includes a three-year warranty and a clear service path on the site.

Who Should Buy the Infitac Fast Mini FMP13?

This model suits pistol owners who want true thermal detection without a large balance penalty. It also suits carbine owners who want a fast heat view at an offset beside a day optic. Landowners who walk short to moderate distances at night gain a compact scanner that fits a pocket or a small pouch. For those who build a rifle around a magnified day sight and need a quick thermal window for brush lines or feeder checks, the offset mount configuration is a clean answer. INFITAC show how offset positions work and how to select mounts for AR pattern rifles.

Limitations and Buying Advice

Every compact thermal carries tradeoffs. A 256×192 core will not show the same level of fine detail at distance as higher resolution rifle scopes. Treat this model as a detection and quick recognition tool at closer ranges. Power planning also matters. CR2 batteries are small and easy to carry, and the optic can run from a battery pack through USB-C, which is useful during long sessions. The page notes export rules under EXPORT COMPLIANCE and explains that the company cannot ship repaired items overseas, so buyers who travel should plan within those limits.

Before you buy

• Confirm your pistol footprint. The box includes an RMR plate, and the company sells RMSc, DPP, and Glock MOS adapters.
• Pick a rifle mount that matches your setup. PM01 covers standard Picatinny rails, PM05 gives you a lower Picatinny height when you need the optic to sit lower, PM02 works on a thirty millimeter scope tube, PM03 provides a 45° offset beside a day optic, and PM04 interfaces with Aimpoint Acro rails for Acro-style mounting surfaces.
• Consider a protective cover for transport and storage, especially if the pistol rides in an open-top holster. The PC01 cover is designed for the Fast Mini series.
• Plan batteries. External power takes priority, and the port supplies power only. If you want a rechargeable workflow, the BC01 kit lists compatible and rechargeble CR2 batteries.

Infitac FMP13: Small Size, Big Potential

The Infitac Fast Mini FMP13 brings a true thermal view to places that usually exclude thermal gear. It rides on an optics-ready pistol, it sits at an offset beside a day optic, and it works in a pocket as a small scanner. The official specification, the included zeroing targets, the clear power behavior, and the mounting ecosystem make setup straightforward for a broad range of owners. Third-party coverage from Texas Plinking and recent retailer write-ups show that this little sight handles real field use rather than serving as a gimmick. If your priorities center on speed and carry comfort with reliable detection at practical distances, this compact thermal is worth serious consideration.

FAQs

Q1. Does the FMP13 record video or photos?

The FMP13 has no built-in recording. For documentation, use an external gun/helmet camera or recorder; many users film the display to review training sessions.

Q2. Can it see through house windows or a car windshield?

No. Long-wave thermal won’t pass through standard glass. You’ll see reflections and the glass’s heat. Open the window or observe from outside for a clear view.

Q3. How fast is it ready from sleep for defensive use?

Enable InstaWake. The sight sleeps to save power, then wakes as you draw or move, presenting the reticle immediately without any button sequence or menu taps.

Q4. How do firmware updates install, and what improves?

Connect via USB to Edge or Chrome, open the upgrade page, select model and port, then install the latest version for stability, wake behavior, and interface refinements.

Q5. Will rain, fog, or cold weather stop it from working?

IP67 handles rain and dust. The sensor functions in cold, though CR2 capacity drops; carry spare batteries or run USB-C external power for extended outings.